[[4.0 Why do Weather and Climate present a global challenge?]]
Climate = the longer term behaviour and character if the atmosphere
* Polar *Tropical * Equable *Means *Temperate *Seasonability * Extreme *Averages
Weather = the day to day events and short term changes
*Temperatures *Humidity *Rain *Snow *Cool *Clouds *Sunshine *Cold *Gale *Wind *Sleet
Areas of our life dependent on the weather or affected by the weather
* Sailors/Shipping
- short term - wind
*Agriculture
- Short Term = storms
- Long term = seasonality
*Tourism
- short term
*Hospitals/Health service
- short term - precipitation and temperature
*Emergancy Services
- short term - ice, fires, flash floods, gales etc
*Manufacturing
- long term
*local/national authorities
- short/long term = decision making
Friday, 8 June 2007
Thursday, 31 May 2007
Chemistry [[Module Three]] Alchols: Elimination
- Alcohols with H atom on carbon next to OH group can be dehydrated to alkenes
- 180 degrees
- sulphuric or conc. phosphoric catalyst.
- Mechanism = Elimination
- Reaction occurs in three steps:
1) Protonation (H+ added to OH group)
2) Loss of water (produces an carbocation)
3) Loss of a proton (produces alkene)
- 180 degrees
- sulphuric or conc. phosphoric catalyst.
- Mechanism = Elimination
- Reaction occurs in three steps:
1) Protonation (H+ added to OH group)
2) Loss of water (produces an carbocation)
3) Loss of a proton (produces alkene)
Chemistry [[Module Three]] Alcohols: Classifying and Reactions
- alcohols classified as primary, secondary or tertiary
- depends on which the carbon the OH group is attatched to
- Many reactions are the same, regardless of where the OH group is
- but three types of alchol differ when oxidised.
[[Oxidation of Alchol]]
- acidified potassium dichromate
- colour change from Orange to Green as Dichromate ions are reduced - test to distinguish primary and secondary from tertiary alcohols.
[Primary Alcohol]
- oxidised to Aldehydes
- colour change from orange to green
- Aldehyde still has H atom and so can be oxidised further
- Further oxidised to Carboxylic Acid
- To stop this happening, remove the aldehyde as it is produced using a condensor
- To get Carboxylic acid, prevent the product from escaping and heat under reflux
[Secondary Alcohol]
- oxidised to Ketones
- No further oxidation
- colour change from orange to green
[Tertiary Alcohols]
- no oxidation
- no colour change
[[Distinguishing bewteen Aldehydes and Ketones]]
- test for secondary/primary alchols
- use of mild oxidising agent
[[Fehlings Solution]]
- colour change from Blue to red in the presence of Aldehydes
- Not oxidised by Ketones
- Copper (II) Complex reduced to Copper (I)
[[Tollens Reagent]]
- Silver Mirror formed when warmed in the presence of Aldehydes
- Not oxidised by Ketones
- [Ag (NH302]+ reduced to Ag
Chemistry [[Module Three]] Alcohols: Ethanol Production
Alcohols = homologous series with general formula CnH2n+1OH
[[Ethanol Production]]
[Fermentation]
- living yeast
- converts sugars into ethanol and carbon dioxide
C6H12O6 --yeast--> 2C2H5OH + 2CO2
- slow at low temps
- at high temps enzymes are denatured
- compromise temp of 35 degrees
[Direct Hydration]
- produced industrially
- steam
-phosphoric acid catalyst
- pressure = 6.5x103
- temp = 300 degrees
C2H4 +H20 <===> C2H5OH
- currently preferred method of ethanol production in UK
- ethene is raw material
[Comparing]
Hydration:
* Fast reaction rate
* Pure product
* Finite raw material
* Continuous (cheap) process
* Expensive Equipment
Fermentation
* Slow reaction rate
* Impure product
* Infinite raw material
* Batch (expensive, manpower) process
* Cheap Equipment
[[Ethanol Production]]
[Fermentation]
- living yeast
- converts sugars into ethanol and carbon dioxide
C6H12O6 --yeast--> 2C2H5OH + 2CO2
- slow at low temps
- at high temps enzymes are denatured
- compromise temp of 35 degrees
[Direct Hydration]
- produced industrially
- steam
-phosphoric acid catalyst
- pressure = 6.5x103
- temp = 300 degrees
C2H4 +H20 <===> C2H5OH
- currently preferred method of ethanol production in UK
- ethene is raw material
[Comparing]
Hydration:
* Fast reaction rate
* Pure product
* Finite raw material
* Continuous (cheap) process
* Expensive Equipment
Fermentation
* Slow reaction rate
* Impure product
* Infinite raw material
* Batch (expensive, manpower) process
* Cheap Equipment
Chemistry [[Module Three]] Haloalkanes: Elimination
- Hydroxide ion can also act as a base
- which allows elimination to take place
- Hydrogen and Bromide elimated from haloalkane
- Forms an alkene
Mechanism:

[[Importance of Substitution and Elimination]]
1) Structure of Haloalkane
- primary haloalkanes give predominantly substitution reactions
- tertiary alkanes favour eliminatation
- secondary do both
2) Base Strength of the nucleophile
- liklihood increases as base strength on nucleophile increases
3) Reaction Conditions
- higher temps = greater chance of elmination
- Elimination = hot, ethanolic conditions
- Substitution = warm, aqueous conditions.
- which allows elimination to take place
- Hydrogen and Bromide elimated from haloalkane
- Forms an alkene
Mechanism:
[[Importance of Substitution and Elimination]]
1) Structure of Haloalkane
- primary haloalkanes give predominantly substitution reactions
- tertiary alkanes favour eliminatation
- secondary do both
2) Base Strength of the nucleophile
- liklihood increases as base strength on nucleophile increases
3) Reaction Conditions
- higher temps = greater chance of elmination
- Elimination = hot, ethanolic conditions
- Substitution = warm, aqueous conditions.
Chemistry [[Module Three]] Haloalkanes: Nucleophilic Substitution
[[Nucleophilic Substitution]]
Haloalkanes: homologous series of compunds with general formula CnH2n+1X where X represents F, Cl, Br and I.
- Halogens are electronegative
- Carbon Halogen bonds are polar
- The electrons in C-X bond are attracted to the halogen atom which gains a slight negative charge
- Therefore the Carbon has a slightly positve charge
- The slightly positive carbon is suceptable from attack by nucleophil
Nucleophile: And electron pair donor
- Nucleophilic attack occurs and the carbon halogen bond breaks, releasing a halide. The halide is replaced by the nucleophile.
- rate of reaction influenced by strength of C-X bond
- C-F bond is very polar but bond is very strong so Flouroalkanes are unreactive
- Chloroalkanes also react slowley
- Bromoalkanes react at a reasonable rate
[[Nucleophilic Substitution Reactions]]
[1. Hydroxide Ions]
- haloalkanes warned with aqueous sodium or potassium hydroxide
- forms alcohols
[2. Cyanide Ions]
- haloalkanes warmed with aqueous/alcholic solution of KCN
- nitriles formed
- carbon chain extended
[3. Ammonia]
- warmed with excess of ammonia
- sealed container
- Primary Amines
- excess of ammonia minimises chance of further reaction.
Chemistry [[Module Three]] Epoxyethane
- more commonly known as ethylene oxide
- highly reactive
- manufactured on large scale
- used in synthesis of important products
* Ethane 1,2-diol
* non-ionic surfactants
[[Production]]
- produced commercially by direct partial oxidation of ethene
- using oxygen/air
- silver based catalyst
- care needed in making and handling
- product = colourless gas
- product = flammable and explosive
- is toxic and may cause respiratory system irritation and neurological effects
- gas is excellent sterilising agent agaisnt bacteria.
[[Reactions]]
-three membered ring makes epoxyethane very reactive towards nucleophiles
Nucleophiles = An electron Pair Donor
-Exothermic reactions with nucleophiles cause the ring to open
- primary products contain 2-hydroxyethyl groups.
[Reaction With Water]
- half epoxyethane commercial produced is converted to ethane 1,2-diol by reaction with water
- Exothermic reaction
- Slow at room temperature
- acid catalyst used
- In industry = epoxyethane treated with ten-fold molar excess of water,, 60 degrees and sulphuric acid.
- Resulting solution is condensed by evapouration and fractional distilation
- yield is 90%
- other product = HOCH2CH2OCH2CH2OH
Subscribe to:
Posts (Atom)
